When it comes to metal roofing in Tallahassee, there’s metal roofing, and then there’s standing seam metal roofing. Standing seam metal roofing in Tallahassee is altogether different than a typical metal roof you might consider. When it comes to choosing a metal roof profile, there are several topics to discuss.

Hidden Fasteners

When considering standing seam metal roofing in Tallahassee, the most fundamental point of difference when it comes to contrasting this metal profile to others is the fact that standing seam metal roofing profiles do not show any fasteners when it is installed. Whereas other metal roofing profiles have the head of the fastener (screw) shown, the standing seam profile does not. The standing seam metal roofing profile is such that the subsequent panel locks into the adjacent panel and in doing so hide that adjacent panel’s row of exposed fastener heads. This construction contributes to the most secure metal roofing profile available.

Thicker Gauge Metal

Whereas some metal roofing profiles will be comprised of 29 or 26 gauge metal, standing seam metal roofs are made from both 26 and 24 gauge metal.

Clean Aesthetic

Standing seam metal roofing in Tallahassee has a very clean look when installed. Because the width of each panel from rib to rib is 16″ and the fact that all of the fasteners are hidden makes standing seam metal roofing very appealing aesthetically. If you are considering which metal roofing profile to consider for your re-roofing project, you can’t go wrong with the clean, crisp look of a standing seam.

A Touch-Less Maintenance

Because the fasteners for standing seam metal roofing are hidden and not exposed, there is virtually no place for pine straw, leaves, or other falling debris to latch on to generate a clump to be dealt with as far as maintenance. This is just one more check to the positive of why you should consider standing seam metal roofing for your next project.

GET A QUOTE NOW!