Use Tacky Tape as per the install manual to help make the space between the paneling and roof decking at the edge of the roof line weather tight.

Use TCM's Radiant Barrier to help reflect heat and add another layer of weather protection to your new roof system.

There are many reasons you will want to use our synthetic roof underlayment over traditional media, like felt. Improve safety, potentially increase installation speed, and add a waterproof layer of protection to the roof deck while the project is underway with our HT Synthetic Roof Underlayment.

We have all the accessories you will need for your project including roof boots in varied sizes and colors.

Create an air space between the deck and the panel system and help increase the overall energy efficiency of your roof with our 1x4 Purlins. Purlins are not needed with every panel profile. Refer to your installation manual for details.

Use Flex-Pro to help your roof system ventilate through the ridge.

Use expanding foam in your valleys to help add weather protection for the overall roof system.

Use inside closures along your roof edge to help make the overall roof system weather tight.

This is a typical location of where the ridge cap is used.

This is the typical location for the gable trim.

This is the typical location for the drip edge.

This is the typical location of transition flashing.

This is the typical location for W-Valley trim

This is the typical location of end wall trim.

This is the typical location for side wall trim.